Transwash 20 TFR

Transwash 20 TFR is a highly concentrated caustic traffic film remover formulated for the toughest cleaning tasks on lorries, HGVs, agricultural machinery, and plant equipment. Designed for professional users who require maximum cleaning power, it delivers outstanding results on heavily soiled vehicles exposed to oil, grease, mud, and road film.

Containing a blend of strong alkalis, surfactants, and cleaning agents, Transwash 20 TFR rapidly breaks down and removes stubborn contamination from paintwork, chassis, and bodywork with ease. It’s ideal for fleet operators, transport depots, and agricultural cleaning where heavy dirt build-up demands a fast and effective solution.

The formula also includes a softener additive that helps bead off water, reducing streaking and leaving a cleaner, brighter finish. Despite its high strength, it’s economical in use, performing effectively at low dilution rates between 1–5% depending on the level of soiling. Suitable for use with hot or cold water pressure washers, foaming systems, or brush washes, Transwash 20 TFR ensures quick, professional-grade cleaning results every time.

For best results, apply evenly to the surface, allow short contact time, and rinse thoroughly with clean water.

Key Features:

• Powerful caustic-based TFR – removes heavy traffic film, oil, grease, and agricultural grime
• Highly concentrated – performs effectively at low dilution rates of 1–5%
• Softener additive – promotes water beading and a cleaner, streak-free finish
• Ideal for heavy-duty applications – perfect for lorries, trucks, and farm vehicles
• Compatible with hot and cold pressure washers – versatile and easy to use
• Fast-acting formula – cuts through stubborn contamination quickly
• Professional performance – trusted by fleet, agricultural, and industrial operators

FAQs

What is Transwash 20 TFR used for?

It’s designed for cleaning heavily soiled commercial vehicles and machinery, including lorries, tractors, and plant equipment.

Can it be used with a pressure washer?

Yes, it works perfectly with hot or cold water pressure washers, foam systems, and brush washes.

What dilution rate should I use?

It’s highly concentrated and should be diluted between 1–5%, depending on dirt levels and cleaning method.

What does the softener additive do?

It helps bead water off surfaces, reducing streaking and leaving a cleaner, polished appearance.

Is it suitable for heavy-duty cleaning?

Yes, it’s formulated specifically for high-demand cleaning environments where strong caustic action is required.

Directions for use:

1. Set chemical dosing control between 1% - 5% as required.

2. Apply evenly, starting at the bottom and working your way upwards.

3. Allow up 5 minutes contact time, then agitate with a vehicle brush before washing off thoroughly with clean high pressure water. Do not allow product to dry on surface.

Hazards & Warnings:

Causes skin and eye irritation. Keep out of the reach of children. Do not get in eyes, on skin or on clothing. IF ON SKIN: Wash with soap and water. IF IN EYES: Rinse cautiously with water for several minutes.