Kranzle Profi 160 TST Cold Pressure Washer

The Profi 160 TST is an excellent design, and the most powerful pressure washer running on an ordinary UK 3-pin plug (240 volt), just like the Quadro 11/140, only designed for easier movement by one person, and it is quicker to convert to operate on suction, when drawing water from a tank or reservoir.

Durable design for industrial and commercial use. The pressure of the Profi 160 TST can be fully adjusted and at maximum will give nearly 2050 psi. This is actual pressure at the nozzle, unlike low pressure chemical injectors where the actual pressure is around 30% lower than the gauge displays - something true of all pressure washers with low pressure chemical option.

The Dirtkiller lance comes as standard with the Profi 160 TST and is a tremendous help when cleaning stone work or tough jobs that need an aggressive spray equivalent to nearly 4100 psi. Dirtkiller lance's give fantastic results when cleaning stone work and block paving, etc. It is very aggressive, you wouldn't want to use it on your car, the spinning pencil jet combines concentrated power over a larger working area.

All connections are brass screw fittings sealed by an O ring, so no tools are needed to change accessories or pack away the machine that takes up little space in the garage or in your van. There are storage compartments for the trigger gun, Dirtkiller lance and Vario lance built into the casing of the machine. Winding lugs for the power cable keep the 5M power cable tidy, and also double as a quick storage grip for the lance and trigger gun in between use.

The hose drum is slightly larger than it needs to be, making it easier to wind up the hose. T-series machines come with 15M of steel braided, rubber coated high pressure hose, a gun and lance. 5M of power cable complete with UK plug.

A major advantage to the new generation of pressure washer from Kranzle is that you can clean with detergents and degreasers at high pressure. This is a big help when cleaning engine compartments, gearboxes or pre-MOT cleaning on HGVs. It also increases the effectiveness of cleaning where hygiene and BIO-SECURITY is essential such as on farms, in areas with livestock, kennels or any food handling areas.

The water tank on a Profi also protects the pump from being starved of water. On a conventional pressure washer attached to a tap via a hose if there is not enough water flow to the pump the pistons inside are held forward by the vacuum that forms on the inlet. This causes knocking in the transmission and serious damage to the pump if not rectified. The water tank on the Profi acts as a buffer between the water mains and the pump and compensates for fluctuations in the supply - protecting the pump.

An excellent value for money machine, well designed easy to maintain and exceptionally durable.